What factors are important when the firefighter inspects fire extinguisher?

Check these details during a monthly fire extinguisher inspection. Confirm the extinguisher is visible, unobstructed, and in its designated location. Verify the locking pin is intact and the tamper seal is unbroken. Examine the extinguisher for obvious physical damage, corrosion, leakage, or clogged nozzle.

Why is it important for a firefighter to inspect his fire extinguisher?

Visual inspections are quick checks to ensure that the fire extinguisher is fully charged, in good operating condition and ready for use, should it be needed. During monthly inspections also check the surrounding area to ensure the fire extinguisher remains easily accessible in the event of an emergency.

What are the main inspection points on a fire extinguisher?

Make sure the nozzle or other parts of the extinguisher are not obstructed in any way. If your portable fire extinguishers have a pin and tamper seal, check to see if they are intact and undamaged. Check for dents, rust, leaks or any sign of abuse or wear.

IMPORTANT:  You asked: Is being a firefighter physically demanding?

What factors should you take into consideration when deciding to use a fire extinguisher?

4 Things You Need to Consider Before Using a Fire Extinguisher to Fight a Fire

  • #1 The Size Of The Fire.
  • #2 The Location of The Fire.
  • #3 What Is Burning.
  • #4 The Condition Of Your Fire Extinguisher.

How do you inspect and maintain a fire extinguisher?

Visually inspect all extinguishers monthly

  1. Make sure the extinguisher is easily accessible and not obstructed.
  2. Check for any damage like dents, cracks or rust to the outside of the extinguisher.
  3. If the extinguisher is equipped with a gauge, make sure the needle is pointing to the green “charged” portion of the dial.

Why is it important for fire department to inspect structure?

The inspector will determine the fire hazards that exist within the building and ways that a fire may spark. The inspector will make sure that emergency responders have easy access to the facility in case of emergency.

What are the elements to check in the fire door and why the checking and inspection?

What do I need to check on a fire door?

  1. Check that the door is closing ‘to latch’ automatically: Open the door halfway and let it go – it should close to latch. …
  2. Ensure that the smoke seals are in place and undamaged. …
  3. Check that there are no penetrations or damage to the door.

What is the OSHA standard for fire extinguishers?

A fire extinguisher, rated not less than 2A, shall be provided for each 3,000 square feet of the protected building area, or major fraction thereof. Travel distance from any point of the protected area to the nearest fire extinguisher shall not exceed 100 feet.

IMPORTANT:  Frequent question: How does a fire hydrant explode?

What is the single most important factor to remember when fighting a fire?

In the event of a fire, we are all confronted with the decision of whether to fight the flames with an extinguisher or evacuate the building immediately. This is probably the most important decision you will face when a fire breaks out.

Why are fire extinguishers important?

Fire extinguishers play a vital role in any fire protection plan in any environment. They are a first aid response to fire and can help prevent catastrophic damage to property and even loss of life.

How are fire extinguisher maintained?

Some manufacturers recommend shaking your dry chemical extinguishers once a month to prevent the powder from settling/packing. Fire extinguishers should be pressure tested (a process called hydrostatic testing) after a number of years to ensure that the cylinder is safe to use.