A fire safety statement is a document issued by or on behalf of the owner(s) of an existing building. The statement confirms that an accredited practitioner (fire safety) has assessed, inspected and verified the performance of each fire safety measure that applies to the building.
What is a fire safety policy statement?
A fire safety policy demonstrates fire safety procedures and what people should do during the unlikely event of a fire. A fire safety policy should include a policy statement covering immediate evacuation, raising the alarm and reporting any concerns.
Do you need a fire safety certificate?
The short answer is probably not… but only because fire safety certificates are no longer issued for most businesses. The principles behind the certificate, however, are still very much in force and if you don’t comply, you could find yourself on the receiving end of a hefty fine.
What works require a fire safety certificate?
Which developments require a Fire Safety Certificate? Works in connection with the material alteration of a shop, office or industrial building where additional floor area is being provided within the existing building or where the building is being sub divided into a number of units for separate occupancy.
How do I get a fire safety schedule NSW?
You can contact the fire safety officer at your local council and request a copy of the fire safety schedule for your building, in the event that council has a record of the FSS, it will often be disclosed during the AFSS process that the accuracy of the FSS is the building owner’s responsibility and not councils.
Is a fire safety policy a legal requirement?
All employers should have a fire safety policy, which identifies a person responsible for fire safety at board or management level.
What are 4 things a fire safety plan should include?
At a minimum, your fire prevention plan must include: A list of all major fire hazards, proper handling and storage procedures for hazardous materials, potential ignition sources and their control, and the type of fire protection equipment necessary to control each major hazard.
Who is responsible for fire safety in your workplace?
When it comes to fire safety in the workplace, the responsibility lies with the employer, building owner, an occupier or facilities or building manager. It falls down to them to ensure that the building that you work in is fire safe.
WHO issues a fire safety notice?
Fire safety notices are generally issued by fire safety officers from your local fire and rescue authority if it is deemed that the standard of fire safety measures are inadequate.
Can I do my own fire risk assessment?
In simple terms yes, there is no reason why you cannot complete your own fire safety risk assessment. … The Fire Safety Risk Assessment must be completed by a “Competent Person”. Therefore you must have the necessary knowledge, skills and experience. The Fire Safety Risk Assessment must also be “Suitable and Sufficient”.
How long does a fire safety certificate last?
The Fire Marshal Certificate is only valid for three years. After this period, you can either take another Fire Marshal Training Course or a shorter refresher course. You will receive a new certificate at this point.
What is the purpose of fire certificate?
A fire safety certificate is granted by a building control authority. It certifies that the building or works, if constructed in accordance with the plans, documents and information submitted to the building control authority, is in compliance with the requirements of Part B of the Building Regulations.
What is a fire safety certificate NSW?
Fire safety certificates
The certificate confirms that each of the fire safety measures that apply to a building (as listed in the fire safety schedule) have been installed and checked by a properly qualified person. This helps verify that the required fire safety measures can perform to the minimum standard.
What is an occupier statement?
Occupiers Statement is a statement confirming that prescribed fire safety installations located in the building have been maintained in accordance to the relevant Maintenance Standard (AS1851 and QDC MP651). … The statement is to be kept with the existing fire records and a copy sent to the QFRS Commissioner each year.
What are critical fire safety measures NSW?
Critical fire safety measures are the fire safety measures that are of a nature or installed in a manner which requires periodic assessment and inspection at intervals of less than 12 months. These measures are specifically identified on the fire safety schedule and form part of a supplementary fire safety statement.