You asked: When putting out a fire you should discharge the extinguishing agent to?

When discharging a fire extinguisher How far should you stand?

Aim low. Standing up to 10 feet away from the fire. Point the extinguisher discharge horn at the front edge of the base of the fire (the lowest point of the fire nearest you). Remember – extinguishers are designed to be operated in an upright position.

Where do you discharge a fire extinguisher?

If the fire extinguisher is partially or fully charged, call your fire department to ask if they accept drop-offs. If not, take the canister to a hazardous waste disposal facility. If the fire extinguisher is empty, squeeze the lever to ensure no pressure remains inside.

What should you do after extinguishing a fire?

Dry Chemical Extinguisher

Vacuum up any loose debris. Spray any caked-on residue with a mixture of rubbing alcohol and warm water. Wipe with a damp rag. A 25 to one ratio of hot water to vinegar can neutralize residue from potassium bicarbonate and sodium bicarbonate.

Which extinguishing agent should be used for a Class D fire quizlet?

A Class D fire should be extinguished using a: Select one: – carbon dioxide extinguisher. – clean agent extinguisher.

IMPORTANT:  Can you burn apple wood in a log burner?

Which type of extinguishing agent is used to extinguish a Class B fire quizlet?

Halon 1301 and Halon 1211 are most commonly used as extinguishing agents for Class B and Class C fires.

When should an employee attempt to extinguish a fire using a portable fire extinguisher?

When workers are allowed to use fire extinguishers, three very specific conditions must be met: Only use a portable fire extinguisher on small fires in their incipient or beginning stages; Page 2 Only use a fire extinguisher when you know what type of material is burning; Only use a fire extinguisher when you have been …

At which part of the fire should you aim the nozzle of your extinguisher when you’re fighting a boat fire?

You are confident that you can operate your extinguisher effectively: Aim the nozzle at the base of the fire. Hold the unit upright. Sweep from side to side at the base, or use a series of short blasts aimed at the base.

How do you release the pressure from a fire extinguisher?

To release pressure, squeeze the top to let out a bit of extinguishing agent. You should not release the entire contents of the bottle; rather, you simply want to start the pressure release process. Once you have done this, wait for the needle on the gauge to fall to zero—this could take a few hours up to a few days.