Pull: Pull the pin, this will break the tamper seal. Aim: Aim low, pointing the nozzle or hose at the base of the fire. Do not touch the horn on a CO2 extinguisher, it gets very cold and can damage the skin. Squeeze: Squeeze the handle to release the extinguishing agent.
When using a fire extinguisher at what part of the flame do you point the nozzle at?
AIM low: Point the extinguisher nozzle (or hose) at the base of the fire. SQUEEZE the handle to release the extinguishing agent.
When using a fire extinguisher aim the spray?
Aim the hose at the base of the fire.
Hold the lower handle lever (the carrying handle) with one hand and grab the hose or nozzle with the other hand. Point the hose directly at the base of the fire, because you have to put out the fuel that’s burning. Do not aim the hose at the flames.
What are the 4 steps in using a fire extinguisher?
The acronym PASS is used to describe these four basic steps.
- Pull (Pin) Pull pin at the top of the extinguisher, breaking the seal. …
- Aim. Approach the fire standing at a safe distance. …
- Squeeze. Squeeze the handles together to discharge the extinguishing agent inside. …
When using a fire extinguisher work slowly and methodically to ensure that the fire is out?
Aim at the base of the fire, not the flames. This is important – in order to put out the fire, you must extinguish the fuel. Squeeze the lever slowly. This will release the extinguishing agent in the extinguisher.
What to do after you use a fire extinguisher?
After several minutes, wipe the area with a damp rag. Give the affected area a final wash with soap and water, and then rinse clean. Use fans to help the spot dry quickly. If dishes, cookware, or clothing have dry chemical fire extinguisher residue on them, wash as usual in the dishwasher or washing machine.
When should you use a fire extinguisher?
You should only consider using a fire extinguisher if all members of your home have been alerted to the fire and the fire department has been called. Also, make sure you are safe from smoke and that the fire is not between you and your only escape route.
What are the 4 types of fire extinguishers?
There are four classes of fire extinguishers – A, B, C and D – and each class can put out a different type of fire.
- Class A extinguishers will put out fires in ordinary combustibles such as wood and paper.
- Class B extinguishers are for use on flammable liquids like grease, gasoline and oil.
What is the correct sequence of fire protection steps?
Remember, if you feel that you cannot safely extinguish the fire using the portable extinguisher available and if you have not already done so, pull the fire alarm, evacuate the area, and then call the fire department. When using an extinguisher, use the PASS system – Pull, Aim, Squeeze, Sweep.
When would you use a fire extinguisher in the workplace?
Employers are generally required to provide portable fire extinguishing equipment in the workplace for use in fighting incipient-stage fires. An “incipient-stage fire” means initial or beginning stage that can be controlled or extinguished by portable fire extinguishers.
How do you use a fire extinguisher explain pass method with the help of diagram?
When operating a fire extinguisher, remember the word PASS:
- Pull the pin. Hold the extinguisher with the nozzle pointing away from you and release the locking mechanism.
- Aim low. Point the extinguisher at the base of the fire.
- Squeeze the lever slowly and evenly.
- Sweep the nozzle from side-to-side.