What is the correct way to extinguish a fire to aim?

Where do you aim at a fire as you extinguish a fire?

Aim at the base of the fire. If you aim at the flames (which is frequently the temptation), the extinguishing agent will fly right through and do no good. You want to hit the fuel. Squeeze the top handle or lever.

What is the proper way to use a fire extinguisher?

Discharge the extinguisher within its effective range using the P.A.S.S. technique (pull, aim, squeeze, sweep). Back away from an extinguished fire in case it flames up again. Evacuate immediately if the extinguisher is empty and the fire is not out.

What are the ways to extinguish a fire?

All fires can be extinguished by cooling, smothering, starving or by interrupting the combustion process to extinguish the fire. One of the most common methods of extinguishing a fire is by cooling with water.

What is the correct sequence for operating a cartridge fire extinguisher?

Answer: The correct answer is A, Pull, Aim, Squeeze, Sweep.

What is pass method?

When operating a fire extinguisher, remember the word PASS:

Pull the pin. Hold the extinguisher with the nozzle pointing away from you and release the locking mechanism. Aim low. Point the extinguisher at the base of the fire. Squeeze the lever slowly and evenly.

IMPORTANT:  How high should a fire pit flame be?

When should you use a fire extinguisher?

You should only consider using a fire extinguisher if all members of your home have been alerted to the fire and the fire department has been called. Also, make sure you are safe from smoke and that the fire is not between you and your only escape route.

How can a fire be extinguished Class 8?

Fire can be extinguished in 3 ways:

  • By removing the fuel.
  • By removing the heat.
  • By cutting off the air supply to the burning substance.

How do you extinguish a Class A fire?

Luckily, Class A fires are the easiest type to extinguish. The Fire Equipment Manufacturer’s Association recommended using a water or foam fire extinguisher on Class A fires. You can also use water to douse the fire, as it can remove the fire’s heat supply.

What are the 4 steps in using a fire extinguisher?

The acronym PASS is used to describe these four basic steps.

  • Pull (Pin) Pull pin at the top of the extinguisher, breaking the seal. …
  • Aim. Approach the fire standing at a safe distance. …
  • Squeeze. Squeeze the handles together to discharge the extinguishing agent inside. …
  • Sweep.