What is an annual fire alarm test?

During an Annual Fire Alarm Inspection, a technician tests and visually inspects all of these devices. This ensures that the devices will trip during a fire and meet the National Fire Protection Association (NFPA) standards. This also establishes that the FACP responds correctly to each device.

What does a fire alarm inspection consist of?

To inspect and test the fire alarms, it takes a team of two technicians. The first technician is stationed at the fire alarm panel, while the second technician goes from floor to floor inspecting and testing the smoke detectors, fire alarm pull stations, and the fire alarm horns & strobes.

How often should a fire alarm test be carried out?

In section 25.2 it states that all fire alarm systems in commercial premises need to be tested weekly to ensure that there has not been any major failure, and that the fire alarm system is in working order.

What is a semi annual fire alarm inspection?

Semi-annual fire alarm inspections and testing usually include: Testing of the functionality of flow switches, tamper switches and backup batteries. Visual inspections of initiation and notification devices.

IMPORTANT:  How much do firefighters make in Saint John NB?

How long does a fire alarm test last?

An inspection can range from 1 hour to a few days depending on the number of devices and complexity of the fire alarm system. If you have a large facility, the inspector should give you an idea of how long it will take to complete the inspection.

How do you announce a fire alarm test?

Fire Alarm Pre-Test Message: Three chimes… “May I have your attention please. May I have your attention please. We will be conducting a test of the fire alarm system. Please disregard all alarms until further notice.

Is fire alarm testing a legal requirement?

According to legal requirements, a commercial fire alarm system must be subject to periodic testing and inspections so that faults can be identified and preventive measures can be taken to ensure continued reliability on the system.

Is a fire alarm a legal requirement?

Many business owners question whether a fire alarm is a legal requirement on their premises. The answer to this is no, however business owners do need ‘an appropriate fire detection system’ in their place of business.

Are fire alarms mandatory in the workplace?

Current UK fire alarm regulations state that all business premises must have ‘an appropriate fire detection system’. That means that if there’s a fire, there needs to be a way for that fire to be easily detected and occupants can be warned easily.

How often should fire alarms be replaced?

Smoke alarms have a limited lifespan. The National Fire Protection Association (NFPA) recommends every smoke alarm be replaced after 10 years and that regular batteries be replaced every six months. With 10-year sealed battery alarms, battery replacements and late-night battery chirps are eliminated for a decade.

IMPORTANT:  What does structural firefighting PPE consist of?

How often should smoke alarms be tested per OSHA?

The employer shall assure that all supervised employee alarm systems are tested at least annually for reliability and adequacy.

Are fire alarms required by OSHA?

OSHA’s employee alarm systems standard 29 CFR 1910.165 applies to all employers that use an alarm system to satisfy any OSHA standard that requires employers to provide an early warning for emergency action, or reaction time for employees to safely escape the work place, the immediate work area, or both.

What does a fire alarm technician do?

Fire alarm technicians primarily install and update fire alarm systems in commercial and residential buildings. They perform inspections to ensure alarms are installed according to code and perform a detailed inspection to check for any issues. Then, they test and repair the alarm systems that are already in place.