How do you sound the alarm if there is a fire?

How do you raise the alarm in the event of a fire?

Raising the alarm

If you discover a fire you must first raise the alarm by operating the nearest break glass call point or calling the local emergency number.

How should a fire alarm sound?

When the fire alarm is activated, building occupants will hear a horn which will sound FOUR-FOUR-FOUR (4-4-4). The duration of this signal will be approximately fifteen (15) seconds. A pre-recorded voice message (female voice) will be heard over the building intercom system.

Do all fire alarms have to sound the same?

All fire alarm sounders in a building should produce the same sound, distinct from any other audible warning devices in the building.

How do you identify the point of activation when the alarm signal sounds?

Manual call points

When activated they will raise a plastic flag out of the top to tell which alarm was activated. They are usually connected to a central fire alarm panel which is in turn connected to an alarm system in the building, and often to a local fire brigade dispatcher as well.

IMPORTANT:  Can a fire pit be near a fence?

How loud is a fire alarm?

Noise levels of alarms

Fire alarms are set at a maximum level of 120 dBA; however even at this high level, an individual’s true exposure is unlikely to approach the 90 dBA average due to: Distance away from the alarm – noise levels fall off as the square of the distance.

How does a fire alarm work?

The fire alarm system can be set off automatically by smoke detectors, heat detectors or manually. These sensors are set to detect certain levels of heat or smoke that could be an indication of fire. … When smoke particles pass thru the chamber of the optical detector, it scatters light that triggers the alarm.

Is it illegal to not have a fire alarm?

Though it is not illegal to be without a fire alarm in your home, it could affect your home insurance. … Therefore, whether you’re letting, working, renting or a homeowner, it is advisable to always have a working fire alarm fitted in your premises.

How often does a fire alarm beep?

Consistent Chirping

An alarm will chirp every 30 to 60 seconds for a minimum of seven days. With a “low battery” announcement, disconnect the unit and replace the batteries.

When should you shout a fire alarm?

If you discover or even suspect a fire, then you need to raise the alarm immediately. This is so that everyone can get to safety before the fire escalates in seriousness.

What happens if a red manual call point is activated?

MCP – Manual Call Point is the small red box with the glass panel and button. Breaking the glass and pushing the button will activate the Fire Alarm. Mobility Impaired Person – A person with physical, mental or sensory impairment, either temporary or permanent, who requires assistance during emergency evacuations.

IMPORTANT:  Quick Answer: What are the different roles in the fire service?

What is manual alarm call point?

A manual call point is a device which enables personnel to raise an alarm in the event of a fire incident by pressing a frangible element to activate the alarm system.