What is the four 4 step process to using a fire extinguisher?
For an easy-to-remember 4-step process to operating a fire extinguisher, learn the PASS system: Pull the pin while holding the extinguisher away from you to unlock the mechanism. Aim low toward the base of the fire. Squeeze the lever slowly.
How do you carry a fire extinguisher?
Walk with the fire extinguisher to the vehicle in which you will transport it. Never run while you carry it, or you risk dropping it. Wrap the fire extinguisher in a blanket as a cushion, and place it upright in the vehicle in a tight spot so it won’t shift during transport.
How do you clean up after a fire extinguisher goes off?
Vacuum or sweep up loose debris. Spray stuck-on residue with isopropyl alcohol diluted 50 percent with warm water. Let the solution sit for several minutes, and then wipe with a damp rag. To neutralize sodium bicarbonate and potassium bicarbonate residue, apply a solution of 98 percent hot water and 2 percent vinegar.
Should you twist the pin on a fire extinguisher?
Fire Extinguisher Problems
To remove the pin, rest your hand on the top of the cylinder, not on the handle itself. The pins are retained with a plastic strap which can be broken by twisting the pin. If you can’t get the pin out, you can’t use the extinguisher and you should be taking large steps away from the incident.
What are the three things you need to consider before using a fire extinguisher?
4 Things You Need to Consider Before Using a Fire Extinguisher to Fight a Fire
- #1 The Size Of The Fire.
- #2 The Location of The Fire.
- #3 What Is Burning.
- #4 The Condition Of Your Fire Extinguisher.
Is breathing in fire extinguisher bad?
Inhalation of monoammonium phosphate and sodium bicarbonate can cause mild irritation to the nose, throat, and lungs and results in symptoms like shortness of breath and coughing. Dizziness and headache are also possible. These symptoms usually resolve quickly with fresh air.
Can you use a stove after using a fire extinguisher?
If you are using a properly rated fire extinguisher for an oven fire and clean up the residue as soon as possible, your oven will not be ruined when using a fire extinguisher to put out an oven fire.
Can you still use a grill after fire extinguisher?
If the grill was sprayed with an ANSUL (common household dry chemical) extinguisher all you need to do is pressure wash to clear all the powder off. The powder is a mild corrosive and will damage your grill if left on. Carbon dioxide extinguishers leave no residue so you don’t need cleaning anyway.
Why do you sweep the fire extinguisher from side to side?
Swipe from side to side to cover all areas the fire may have spread to. Before operating a fire extinguisher fire extinguisher, you must take some safety precautions. … If the fire is small enough and can easily be put out and contained, continue to use the P.A.S.S. technique to put it out.
When squeezing the handle of a fire extinguisher it is important to?
Squeeze the top handle or lever. This depresses a button that releases the pressurized extinguishing agent in the extinguisher. until the fire is completely out. Start using the extinguisher from a safe distance away, then move forward.
What are the fire extinguisher Colours?
The five fire extinguisher colours are:
- Blue – Dry Powder.
- Black – Carbon Dioxide (CO2)
- Cream – Foam.
- Red – Water (Spray and Mist)
- Yellow – Wet Chemical.