How do you check a fire extinguisher?

Examine the extinguisher for obvious physical damage, corrosion, leakage, or clogged nozzle. Confirm the pressure gauge or indicator is in the operable range or position, and lift the extinguisher to ensure it is still full. Make sure the operating instructions on the nameplate are legible and facing outward.

How do they test fire extinguishers?

The recommended way to test fire extinguishers with the pressure pin on top is to press in the pin. If it pops back up, your extinguisher is still pressurized. On models with a pressure gauge, if the needle is in the green, the unit is pressurized.

How often should a fire extinguisher be checked?

NFPA 10 requires extinguishers be inspected when they are initially installed and once a month after that. You should inspect extinguishers more frequently if they are installed in locations where they are more prone to rust, impact or tampering.

How do you inspect and maintain a fire extinguisher?

Visually inspect all extinguishers monthly

  1. Make sure the extinguisher is easily accessible and not obstructed.
  2. Check for any damage like dents, cracks or rust to the outside of the extinguisher.
  3. If the extinguisher is equipped with a gauge, make sure the needle is pointing to the green “charged” portion of the dial.
IMPORTANT:  Does Ford make firetrucks?

Can I test my own fire extinguisher?

These inspections are usually to be conducted monthly. Since they’re not an in-depth service, they can be conducted by a person within the business, such as a Fire Warden. This is someone with the basic knowledge and training to be able to complete the task and record the findings.

How do you tell if your fire extinguisher is expired?

Check for an expiration date.

Look for a paper tag on the fire extinguisher showing a record of maintenance. It may not connote an expiration date, but if the oldest date on the tag was more than 10 years ago, your extinguisher’s days are likely numbered—it may already have lost its ability to fight flames.

How do you read a fire extinguisher service tag?

The left side top number is the serial number of the extinguisher. Below the number will be a name and number stamp. The name should read the first and last name of the person who conducted the service. That technician’s state id number is located below the name.

How do you inspect a fire extinguisher OSHA?

Here are the OSHA requirements for fire extinguisher inspection, maintenance, and testing requirements:

  1. Inspect, maintain, and test all portable fire extinguishers in the workplace. …
  2. Visually inspect portable extinguishers or hoses monthly. …
  3. Perform an annual maintenance check on portable fire extinguishers.

How do you inspect a fire extinguisher at home?

6 Steps to Inspecting Your Fire Extinguisher

  1. Step 1: Ensure You Have Easy Access. …
  2. Step 2: Check the Fire Extinguisher Inspection Tag. …
  3. Step 3: Gauge the Pressure. …
  4. Step 4: Confirm the Hose and Pin Are in Place. …
  5. Step 5: Look for Physical Damage. …
  6. Step 6: Update the Inspection Tag.
IMPORTANT:  Why Nitrogen gas is used in fire extinguisher?

Do fire extinguishers need to be checked?

Annual fire extinguisher checks

Every fire extinguisher must receive a basic service annually. This is to be carried out by a competent and trained professional service engineer. The fire extinguishers will be inspected and certified in accordance with British Standards 5306-3:2017.

Can a fire extinguisher explode if dropped?

Can a Fire Extinguisher Explode From Being Dropped? Yes, if dropped too far a fire extinguisher can burst potentially causing damage to anyone nearby. Do not throw or toss a fire extinguisher to anyone because they can drop it or miss it.