Where do you point a fire extinguisher?
Aim the nozzle, horn, or hose of the fire extinguisher at the base of the fire (this means the bottom, where the stuff that’s burning is located). A common mistake is to aim into the flames. This won’t put out the fire.
How do you aim a fire extinguisher?
P.A.S.S. the Fire Extinguisher
- Aim: Aim the nozzle of the fire extinguisher low at the base of the fire.
- Squeeze: Squeeze the trigger you just pulled the pin out of. Remember to squeeze it slowly and evenly, so it is as effective as possible.
- Swipe: Swipe from side to side to cover all areas the fire may have spread to.
How do you aim a fire extinguisher manually?
Aim low: Point the extinguisher nozzle (or hose) at the base of the fire. Always hold the extinguisher vertically, never horizontally. Squeeze the level fully: This will release the extinguishing agent through the nozzle. Releasing the lever will stop the discharge.
How should fire extinguishers be marked?
According to NFPA’s standards, the location of fire extinguishers housed inside cabinets must be “marked conspicuously.” Also, in large rooms and in places where visual obstructions exist, “means shall be provided to indicate the extinguisher location.” Local building codes typically follow NFPA standards.
What are the 4 steps in using a fire extinguisher?
The acronym PASS is used to describe these four basic steps.
- Pull (Pin) Pull pin at the top of the extinguisher, breaking the seal. …
- Aim. Approach the fire standing at a safe distance. …
- Squeeze. Squeeze the handles together to discharge the extinguishing agent inside. …
What is the four 4 step process to using a fire extinguisher?
For an easy-to-remember 4-step process to operating a fire extinguisher, learn the PASS system: Pull the pin while holding the extinguisher away from you to unlock the mechanism. Aim low toward the base of the fire. Squeeze the lever slowly.
What angle should you hold utensils while feeding patients at mealtime?
Hold the utensil to the patient’s mouth at a 90°angle. Always let the patient know which food is being offered.
How many times should a fire extinguisher be inspected?
NFPA 10 requires extinguishers be inspected when they are initially installed and once a month after that. You should inspect extinguishers more frequently if they are installed in locations where they are more prone to rust, impact or tampering.
What is the correct sequence of fire protection steps?
Remember, if you feel that you cannot safely extinguish the fire using the portable extinguisher available and if you have not already done so, pull the fire alarm, evacuate the area, and then call the fire department. When using an extinguisher, use the PASS system – Pull, Aim, Squeeze, Sweep.
What are the three things you need to consider before using a fire extinguisher?
4 Things You Need to Consider Before Using a Fire Extinguisher to Fight a Fire
- #1 The Size Of The Fire.
- #2 The Location of The Fire.
- #3 What Is Burning.
- #4 The Condition Of Your Fire Extinguisher.
When using a fire extinguisher How far should you stand?
Aim low. Standing up to 10 feet away from the fire. Point the extinguisher discharge horn at the front edge of the base of the fire (the lowest point of the fire nearest you). Remember – extinguishers are designed to be operated in an upright position.
Why should you fully empty a fire extinguisher?
Fire extinguishers are full of pressurised chemicals, so they can’t simply be thrown in the rubbish. You need to take certain steps to make sure it is safe. If the fire extinguisher is not empty, you must empty prior to disposal.
What is the OSHA standard for fire extinguishers?
A fire extinguisher, rated not less than 2A, shall be provided for each 3,000 square feet of the protected building area, or major fraction thereof. Travel distance from any point of the protected area to the nearest fire extinguisher shall not exceed 100 feet.
What is the proper height to mount a fire extinguisher as per NFPA 10 guidelines?
A fire extinguisher weighing less than 40 pounds, like the extinguishers found in your home, should be hung so that the top is not more than five feet above the ground, but no lower than four inches above the floor, according to the National Fire Protection Association’s Standard for portable fire extinguishers, NFPA- …
Do fire extinguisher signs need to be luminous?
Fire exit and escape route signs
All escape route signs require adequate illumination to ensure they can be seen and understood. They should also be visible under power loss conditions which may require artificial illumination. This does not mean the sign itself needs to be ‘illuminated’.