You asked: When using a fire extinguisher you should aim at the flames not at the source of the fire?

Aim at the base of the fire. If you aim at the flames (which is frequently the temptation), the extinguishing agent will fly right through and do no good. You want to hit the fuel. Squeeze the top handle or lever.

Where should you aim the flame when using a fire extinguisher?

A: Aim the extinguisher nozzle on the hose low, toward the base of the fire. S: Squeeze the handle or lever to discharge the extinguisher. S: Sweep the nozzle back and forth. Keep the fire extinguisher aimed at the base of the fire and move it from side to side until the flames are extinguished.

What part of the fire should you aim a powder extinguisher?

Aiming the extinguisher: Solid Materials: Aim the nozzle at the base of the flames, moving across the area of the fire. Spilled liquids: Aim the nozzle at the near edge of the fire and with a rapid sweeping motion, drive the fire towards the far edge until all the flames have been extinguished.

How far should you be from the fire if spraying the fire extinguisher?

Stand 6 -8 feet away from the fire. Then, remember the word PASS: PULL the pin out to unlock the operating lever. AIM low: Point the extinguisher nozzle (or hose) at the base of the fire.

IMPORTANT:  Can non citizens become firefighters?

When should you use a fire extinguisher?

You should only consider using a fire extinguisher if all members of your home have been alerted to the fire and the fire department has been called. Also, make sure you are safe from smoke and that the fire is not between you and your only escape route.

What to do after you use a fire extinguisher?

After several minutes, wipe the area with a damp rag. Give the affected area a final wash with soap and water, and then rinse clean. Use fans to help the spot dry quickly. If dishes, cookware, or clothing have dry chemical fire extinguisher residue on them, wash as usual in the dishwasher or washing machine.

What do you use powder extinguisher for?

Powder extinguishers are a good multi-purpose fire extinguisher because they can be used on Class A, B and C fires. They can also be used on fires involving electrical equipment however, they do not cool the fire so it can re-ignite.

What’s in powder fire extinguisher?

BC – The standard type of dry powder fire extinguisher, which is filled with sodium bicarbonate or potassium bicarbonate was initially developed for liquid fires (Class B) … involving burning petrol, solvents, oils etc. and Class C fires involving flammable Gases.

How far away should you stand when using a fire extinguisher Mcq?

The correct answer is C, 8 feet. According to FEMA (Federal Emergency Management Agency), it’s recommended that you stand 8 feet away when extinguishing a fire.