When the fire alarm sounds in your building: Immediately evacuate the building to the outside. NEVER go back to retrieve personal belongings. Move away from the front of the building to allow the fire fighters and their trucks to access the building.
How do firefighters respond to fire alarms?
Everyday throughout the United States, fire departments respond to numerous fire alarm activations. Automatically, most firefighters react with a sense of frustration when these alarms occur. … Automatically, most firefighters react with a sense of frustration when these alarms occur.
What is the proper response to a fire?
General fire response procedures must be implemented immediately upon suspicion of a fire. Remove patients and personnel from the immediate fire area if safe to do so. Activate Alarm and notify others. Activate nearest audible fire alarm by pulling the handle down on alarm.
What is the first thing you should do when you hear a fire alarm?
This is an emergency situation, so as soon as you hear a fire alarm, get yourself out of your seat and exit the building via the fire exits as quickly as possible. Fire spreads fast, and you don’t always know how long you’ve got before your means of escape are blocked.
Who do you call when fire alarm goes off?
When you hear the alarm, leave your home immediately, call 911 from outside using a cellphone or a neighbor’s phone, and meet your family at a prearranged meeting place to determine that everyone is safe. Your local firefighters will rule out fire first and then determine what caused the alarm.
What is a response procedure?
Response procedures should be revealed gradually and include discussions about the plan, how and who should investigate, what deliverables are required, including investigative summaries and reports, who should review, and who the decision makers are by title.
What is basic response procedure?
Quick Response: Protect Yourself
Fire: Everyone should evacuate to assembly area (See posted Evacuation Plan) Explosion: Take cover. Assist the injured. Everyone should evacuate to assembly area (See posted Evacuation Plan)
What is the correct sequence of fire protection steps?
Remember, if you feel that you cannot safely extinguish the fire using the portable extinguisher available and if you have not already done so, pull the fire alarm, evacuate the area, and then call the fire department. When using an extinguisher, use the PASS system – Pull, Aim, Squeeze, Sweep.
At what point do you sound the fire alarm if you see a fire in a building?
When the fire alarm is activated, building occupants will hear a horn which will sound FOUR-FOUR-FOUR (4-4-4). The duration of this signal will be approximately fifteen (15) seconds. A pre-recorded voice message (female voice) will be heard over the building intercom system.
What are the fire evacuation procedures in your workplace?
Make sure that all staff are aware of any fire safety plans and procedures in place, along with the location of fire extinguishers, escape routes and assembly point(s). Ensure that you hold regular fire drills and fire alarm tests so that staff are well aware of their escape routes and their responsibilities.
Why should you never approach a fire?
When attempting to find a way to escape a fire, you might not be considering what could be on the other side of the doors you come across, which is why you should always try to be cautious. … This means that the door is actually holding the fire back and opening it would only allow the fire to spread.
What is fire alarm necessary?
Fire alarms are important because they can give you an early signal to something that could be tragic – basically saving your lives. A fire alarm alerts you when they you are busy, working or sleeping. … Make sure to also alert your family and friends on the importance of installing fire alarm systems.
Why do we need to provide a good fire alarm system?
Alarm systems are primarily designed to warn occupants of a fire so they can safely evacuate the premises. … Fire alarm systems are important in providing occupants of buildings prompt warning if a fire occurs. Systems that are not properly installed or maintained may cause unwanted alarm activations.
Which of the following is used in fire alarm?
Photo Cell is used in fire alarm to detect the smoke.