What are the four steps in the PASS method for properly using a fire extinguisher select the most accurate response?

What are the 4 steps in the PASS method?

It’s easy to remember how to use a fire extinguisher if you can remember the acronym PASS, which stands for Pull, Aim, Squeeze, and Sweep. Pull the pin. This will allow you to discharge the extinguisher. Aim at the base of the fire.

What is the four step pass technique when using a fire extinguisher?

Sound the alarm and call the fire brigade. … Keep checking to make sure the fire nor smoke comes between you and your evacuation path. Evaluate the fire and select the correct fire extinguisher for the blaze, if you are unsure of the cause, evacuate immediately. Use the PASS technique to tackle the fire.

What is the pass method?

The ‘PASS’ system stands for Pull, Aim, Squeeze and Sweep. It describes the stages in which a fire extinguisher should be operated and explains what each stage entails, giving enough information for the operator to use the extinguisher safely.

What two steps are part of the PASS method?

P.A.S.S. the Fire Extinguisher

  • Aim: Aim the nozzle of the fire extinguisher low at the base of the fire.
  • Squeeze: Squeeze the trigger you just pulled the pin out of. Remember to squeeze it slowly and evenly, so it is as effective as possible.
  • Swipe: Swipe from side to side to cover all areas the fire may have spread to.
IMPORTANT:  What is the main purpose of a fire department member assistance program quizlet?

How do you use pass method?

When operating a fire extinguisher, remember the word PASS:

  1. Pull the pin. Hold the extinguisher with the nozzle pointing away from you and release the locking mechanism.
  2. Aim low. Point the extinguisher at the base of the fire.
  3. Squeeze the lever slowly and evenly.
  4. Sweep the nozzle from side-to-side.

What is the correct sequence of fire protection steps?

Remember, if you feel that you cannot safely extinguish the fire using the portable extinguisher available and if you have not already done so, pull the fire alarm, evacuate the area, and then call the fire department. When using an extinguisher, use the PASS system – Pull, Aim, Squeeze, Sweep.

What is pass fire extinguisher?

The acronym PASS is used as it can easily be recited and recalled in the case of a fire. P – Pull the pin – After choosing a suitable fire extinguisher, pull the pin to unlock the fire extinguisher, which activates it for use. A – Aim at the fire – Try and aim at the bottom-most part of the fire.

What is pass in fire service?

P.A.S.S. stands for: Pull, Aim, Squeeze, Sweep.

What is pass in fire drill?

To use fire extinguishers correctly, remember the

P.A.S.S. acronym: P = PULL the pin on the fire extinguisher. A = AIM the extinguisher nozzle at the base of the fire. S = SQUEEZE or press the handle. S = SWEEP from side to side until the fire appears to be.

What are the 4 types of fire extinguishers PDF?

There are five main types of fire extinguishers:

  • Water.
  • Powder.
  • Foam.
  • Carbon Dioxide (CO2).
  • Wet chemical.
IMPORTANT:  What product standard is covered by NFPA 1851?

What are the 4 types of fire?

Examples of these include paper and wood. Class B fires are burning flammable liquids. Examples include petrol and paint. Class C fires burn flammable gases.

What are the stages of fire?

By most standards including the International Fire Service Training Association (IFSTA) there are 4 stages of a fire. These stages are incipient, growth, fully developed, and decay.