How do you use a fire system?

How does a fire system work?

A fire alarm system warns people when smoke, fire, carbon monoxide or other fire-related emergencies are detected. These alarms may be activated automatically from smoke detectors, and heat detectors or may also be activated via manual fire alarm activation devices such as manual call points or pull stations.

How does fire detector and alarm system work?

The passage of smoke into the chamber causes the light from the source to be scattered and fall on the photocell. The photocell output is being used to initiate an alarm. In the Light obscuring smoke detector, smoke interferes with a light beam between a light source and photocell.

What are the types of fire fighting systems?

Fire protection for buildings

  • Passive Fire Products. …
  • Portable Fire Equipment. …
  • Alarms and Evacuation Systems. …
  • Fire Sprinkler Systems. …
  • Fire Safety Training.

What are the 2 types of fire alarms?

There are two types of smoke alarms in general use for home smoke alarms: photoelectric and ionization. These smoke alarms sense the presence of smoke differently. The type of smoke produced by a fire depends on the type of fire.

IMPORTANT:  Does using a fire extinguisher ruin a grill?

How do you set up a fire alarm system?

How to Install a Smoke Detector

  1. STEP 1: Determine your mounting location. …
  2. STEP 2: Turn off the power (hard-wired units only). …
  3. STEP 3: Install the smoke detector’s mounting bracket. …
  4. STEP 4: Add power. …
  5. STEP 5: Attach the smoke detector to the base. …
  6. STEP 6: Power up and test your smoke detector.

How do I activate my fire alarm?

To activate the fire alarm throughout the building, you must pull the smaller inner pull station lever. (Again take care to not activate any pull station labeled as “Clean Agent” unless it is intended to do so.)

How do you use fire fighting equipment?

Using a fire extinguisher

  1. Pull: Pull the pin, this will break the tamper seal.
  2. Aim: Aim low, pointing the nozzle or hose at the base of the fire. …
  3. Squeeze: Squeeze the handle to release the extinguishing agent.
  4. Sweep: Sweep from side to side at the base of the fire, the fuel source, until the fire is out.

How do fire fighting equipment work?

The acronym PASS is used to describe these four basic steps.

  1. Pull (Pin) Pull pin at the top of the extinguisher, breaking the seal. …
  2. Aim. Approach the fire standing at a safe distance. …
  3. Squeeze. Squeeze the handles together to discharge the extinguishing agent inside. …
  4. Sweep.

Why do we need a fire fighting system?

A fire fighting system is probably the most important of the building services, as it aims to protect human life and property, strictly in that order.

IMPORTANT:  What do firefighters do at airports?

What are the three main items needed to start a fire?

Oxygen, heat, and fuel are frequently referred to as the “fire triangle.” Add in the fourth element, the chemical reaction, and you actually have a fire “tetrahedron.” The important thing to remember is: take any of these four things away, and you will not have a fire or the fire will be extinguished.

What are the 4 basic parts of fire alarm?

What Are the Basic Components of Fire Alarm & Detection Systems?

  • Fire alarm initiating devices.
  • Fire notification devices.
  • Fire alarm control panel.
  • Primary power supply.
  • Backup power supply.

How many fire systems are there?

The two main types of fire alarm systems are conventional and addressable. The various components that make up these systems are either automatic or manual.