Aim the nozzle or outlet towards the base of the fire. Squeeze the handles together to discharge the extinguishing agent inside. To stop discharge, release the handles. Sweep the nozzle from side to side as you approach the fire, directing the extinguishing agent at the base of the flames.
How do you sweep a fire extinguisher?
The PASS Method: Using a Fire Extinguisher
- Pull the pin. Hold the extinguisher with the nozzle pointing away from you and release the locking mechanism.
- Aim low. Point the extinguisher at the base of the fire.
- Squeeze the lever slowly and evenly.
- Sweep the nozzle from side-to-side.
What area of the fire should you point and sweep the extinguisher at?
Aim low. Stand at a safe distance from the fire (the water stream will reach at least 30 feet). Point the extinguisher nozzle at the front edge at the base of the fire (the lowest point of the fire nearest you).
When should you sweep a fire extinguisher?
SWEEP FROM SIDE TO SIDE
Until the fire is completely out. Start using the extinguisher from a safe distance away and move forward sweeping the nozzle from side to side. Once the fire is out, keep an eye on the area in case it re-ignites.
Why do you sweep the fire extinguisher from side to side?
Swipe from side to side to cover all areas the fire may have spread to. Before operating a fire extinguisher fire extinguisher, you must take some safety precautions. … If the fire is small enough and can easily be put out and contained, continue to use the P.A.S.S. technique to put it out.
Why do you aim a fire extinguisher at the base of a fire?
Aim at the base of the fire. If you aim at the flames (which is frequently the temptation), the extinguishing agent will fly right through and do no good. You want to hit the fuel.
What is the proper way to use a fire extinguisher?
Discharge the extinguisher within its effective range using the P.A.S.S. technique (pull, aim, squeeze, sweep). Back away from an extinguished fire in case it flames up again. Evacuate immediately if the extinguisher is empty and the fire is not out.
Where do you aim foam extinguishers?
Aim the hose at the base of the fire with one hand. Don’t aim for the flames, but instead for the base moving the jet across the area of the fire to cover the flammable liquid.
What is the correct sequence for operating a cartridge fire extinguisher?
Answer: The correct answer is A, Pull, Aim, Squeeze, Sweep.
Where should you aim a fire extinguisher stream when extinguishing a fire on a boat?
Where should you aim a fire extinguisher’s stream when extinguishing a fire? Aim at the base of the fire and use a sweeping motion.
What are the 4 steps in using a fire extinguisher?
The acronym PASS is used to describe these four basic steps.
- Pull (Pin) Pull pin at the top of the extinguisher, breaking the seal. …
- Aim. Approach the fire standing at a safe distance. …
- Squeeze. Squeeze the handles together to discharge the extinguishing agent inside. …
What is the four 4 step process to using a fire extinguisher?
For an easy-to-remember 4-step process to operating a fire extinguisher, learn the PASS system: Pull the pin while holding the extinguisher away from you to unlock the mechanism. Aim low toward the base of the fire. Squeeze the lever slowly.
What is release lever fire extinguisher?
This is important – in order to put out the fire, you must extinguish the fuel. Squeeze the lever slowly. This will release the extinguishing agent in the extinguisher. If the handle is released, the discharge will stop. Sweep from side to side.
What should you do in the event of a fire Wawa 5 steps?
In the event of a fire, the following steps should be taken to ensure the safety of all building occupants:
- Activate the fire alarm.
- Call 911 immediately and provide information.
- Assist injured personnel or notify emergency responders of the medical emergency.
- Exit the building following emergency maps.